My Library
Meet Tiffany Contact

Wood

(18) 2” x 4” x 8’ CedarΒ https://go.magik.ly/ml/3swoi/

(8) 2” x 2” x 8’ Cedar Β https://go.magik.ly/ml/3stlk/

(1) 5/4” x 4” x 8’ Cedar Decking BoardΒ https://go.magik.ly/ml/3stlr/

(1) 1” x 10” x 8’ Whitewood BoardΒ https://go.magik.ly/ml/3stls/

───────────────────────

Other materials:

(1) Aluminum U-Channel - Cut into: (4) https://go.magik.ly/ml/3stlt/

(1 Pack) #12 x 1 Hex Screws (For metal channel):Β https://go.magik.ly/ml/3stlv/

(1 Pack) #8 x 2-1/2” Screw:Β https://go.magik.ly/ml/3stlx/

Pocket hole jig:Β https://go.magik.ly/ml/3stlp/

Wood glue:Β https://linktw.in/syhuxD

Pipe clamps (pipe not included):Β https://go.magik.ly/ml/3stw1/

───────────────────────

Finishing:

Furniture Feet:https://linktw.in/shlgcd

Topcoat/sealant:Β https://linktw.in/aPyrsN

Deck staining brush:Β https://linktw.in/CHhJXD

Sanding sponges:Β https://linktw.in/OdiOil

Waterproof Lights (these seem to come and go out of stock): https://go.magik.ly/ml/3stm1/Β 

Alternate plug in options:

Β  Β  Β Β https://linktw.in/VtazLo://linktw.in/VtazLo

Β  Β  Β Β https://https://go.magik.ly/ml/3swpg//ml/3swpg/

Β  Β  Β Β https://linktw.in/jLhZZg://linktw.in/jLhZZg

Solar light option:Β https://go.magik.ly/ml/3stmo/

CUT LIST

Here are the cuts needed to create this table. You can find a videoΒ tutorialΒ β†’Β here
───────────────────────

(18) 2” x 4” x 8’ Cedar -Β Cut into: (9) Uncut for table top / (22) @ 27.5” (18 for sides/legs and 4 for the vertical piece on the box frame to attach the sides together)/ 4 @ 28.75” (used as the horizontal pieces on the box frame for the sides/table legs).

(8) 2” x 2” x 8’ Cedar - Cut into: (2) Uncut for overhead portion/ (4) @ 84” for overhead support pieces/ (2) @ 3-1/4” shorter than the full width table top boards (Approx. 92.75” long)

(1) 5/4” x 4” x 8’ Cedar Decking Board - Cut into: (6) @ 11” (for overhead supports):

(1) 1” x 10” x 8’ Whitewood Board - Cut to: 3” shorter than table top (Approx. 93”) & notched 1.5” x 4” to clear the frame for the side boards

(1) Aluminum U-Channel - Cut into: (4) at 34.75” and bevel 30-45Β° at each the end for safety

Β